Electro Voice RE-1 CSR-1000B

Electro Voice RE-1 CSR-1000B Electro Voice RE-1 CSR-1000B Description: The CSR-1000B includes: CSB1000 Transmitter, CSR-1000 receiver, rack mount hardware, and two wave antennas. (handheld mic pictured above is not included in package) Electro Voice RE-1 CSR-1000B Features: Cast magnesium housing weighs only ounces but is ultra-sturdy enough to take the pounding on tour. Detachable 1/4-wave antenna permits easy replacement or using different antenna options. Cell phone style beltclip included for quick and easy attachment. Optional pouches also available for wearing under costumes or for more vigorous applications. EV has a wide selection of lapel and headworn microphones and microphone accessories to go with the RE-1 bodypack transmitter. CSR-1000 Receiver Specifications: Controls Front Panel: On/Off, Menu, Set, Up, Down Buttons Rear Panel: 1/4 inch output level Indicators LCD Group, Channel, Diversity, Label, Set-up Backlit Display: Transmitter Battery Level, Audio Signal Amplitude and RF Signal Strength, Squelch Connectors Back Panel: 1/4 inch unbalanced adjustable line level output XLR balanced mic level output USB programming port Antennas: Detachable 1/4-wave Number of Channels: 950 possible (programmable in 25 kHz steps) Diversity: DSP SecurePhase True Diversity Receiver Type: Synthesized PLL Agile UHF RF Sensitivity: <0.8uV for 12 dB SINAD Agency Approvals: FCC, IC, CE Audio Specifications 100 - 15 kHz +/- 2 dB Microphone Frequency Response: 30 - 15 kHz +/- 2 dB Instrument Audio Output Level: Line Level 8 mV - 0.775V RMS at 100 k ohm load Balanced -20 dBV max (at40 kHz deviation) Distortion: Less that 0.5% (at1 kHz, 40 kHz deviation) Signal to Noise Ratio: > 110 dB(A) Dynamic Range: >100 dB General Specifications: Power Supply: External 12 VAC 750mA in-line with cord Size: 1.72 inch H x 7.50 inch W x 8.38 inch D 43.69 mm H x 190.50 mm W x 212.85 mm D CSB-1000 BodyPack Transmitter Specifications: Controls: Power on/off switch, Audio Gain Adjustment with 40 dB range, Transmit Power Switch, Microphone/Instrument Switch (0,-20 dB), Menu, Set, Up, Down Buttons Indicators: Red LED Low Battery Indicator, LCD displays one of the following: Channel/Group, Frequency, or Battery Level Battery Life: 8 hours with 9V alkaline typical Antenna: External 1/4-wave detachable Connector: TA4 input for microphone Pin 1 ground, Pin 2 Mic input Pin 3 +5V Bias, Pin 4 +5V through 3 k. RF Output: Normal: 5 mW typical High: 50 mW typical Case Material: Cast Magnesium Size: 4.4 inch H x 2.6 inch W x .9 inch D 111 mm H x 66 mm W x 23 mm D Get your Electro Voice RE-1 CSR-1000B today!