Electro Voice RE-1 CSR-1000HD

Electro Voice RE-1 CSR-1000HD Electro Voice RE-1 CSR-1000HD Description: The CSR-1000HD includes the CSH-1000D transmitter featuring the N/D767a dynamic element, CSR-1000 receiver, rack mount hardware, and 1/4 wave antennas. Electro Voice RE-1 CSR-1000HD Feature: One-of-a-kind "smart" battery circuit in the transmitters means there is no way to put the battery in wrong. LCD display and same four control buttons as receiver make channel or frequency programming quick and easy. Low battery LED lights when battery needs changing and you can check the battery level every time you turn on the transmitter. One on/off switch also acts as a mute. Great for pauses in presentations and worship services. On/off button can be disabled to prevent accidental turnoffs during performance. Normal and High power transmit uses low power for the application, maximizing number of simultaneous systems and limiting RF spillover into adjacent buildings/ theaters. for better performances. Interchangeable microphone head permits choice of elements to fit vocalist's style and environment. N/DYM® 767a premium dynamic vocal mic with VOB™ (Vocally-Optimized Bass), outstanding gain before feedback for high SPL stages. Internal 1/2-wave antenna: outstanding range; stays out of harm's way Over-molded Warm-Grip™ handle effectively reduces handling noise and encourages proper microphone technique for better performances. CSR-1000 Receiver Specifications: Controls Front Panel: On/Off, Menu, Set, Up, Down Buttons Rear Panel: 1/4 inch output level Indicators LCD Group, Channel, Diversity, Label, Set-up Backlit Display: Transmitter Battery Level, Audio Signal Amplitude and RF Signal Strength, Squelch Connectors Back Panel: 1/4 inch unbalanced adjustable line level output XLR balanced mic level output USB programming port Antennas: Detachable 1/4-wave Number of Channels: 950 possible (programmable in 25 kHz steps) Diversity: DSP SecurePhase True Diversity Receiver Type: Synthesized PLL Agile UHF RF Sensitivity: <0.8uV for 12 dB SINAD Agency Approvals: FCC, IC, CE Audio Specifications 100 - 15 kHz +/- 2 dB Microphone Frequency Response: 30 - 15 kHz +/- 2 dB Instrument Audio Output Level: Line Level 8 mV - 0.775V RMS at 100 k ohm load Balanced -20 dBV max (at40 kHz deviation) Distortion: Less that 0.5% (at1 kHz, 40 kHz deviation) Signal to Noise Ratio: > 110 dB(A) Dynamic Range: >100 dB General Specifications: Power Supply: External 12 VAC 750mA in-line with cord Size: 1.72 inch H x 7.50 inch W x 8.38 inch D 43.69 mm H x 190.50 mm W x 212.85 mm D CSH-1000 Handheld Transmitter Specifications: Controls: Power on/off, Audio Gain Adjustment with 26 dB range Transmit Power Switch, Menu, Set, Up, Down Buttons Displays: Red LED Low Battery Indicator, LCD displays one of the following: Channel/Group, Frequency, or Battery Level Battery Life: 8 hours with 9V alkaline typical Antenna: Internal 1/2-wave Microphone Elements: EV N/D 767a Dynamic or RE 510 Condenser RF Output: Normal