Electro Voice ZX1i-100tw

Electro Voice ZX1i-100tw Electro Voice ZX1i-100tw Description: The Electro-Voice® ZX1i-100tw is the new standard of no compromise audio performance and versatility in a simple to install, compact sound reinforcement package. The enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small cabinet loudspeakers and enables exceptional low-frequency response without vent noise. ZX1i installation is incredibly simple with the included QuickSAM mounting system. The QuickSAM system is a unique, integrated mounting bracket which is virtually foolproof. It permits the installer to simply snap the speaker onto the bracket, then tighten it to the desired position. For array mounting, there is an optional array bracket kit available which permits multiple units to be mounted together for a variety of configurations. All Zx1i "t" versions use a special circuit that, when in transformer mode, re-configures the network to a current actuated Hi-Pass filter at the transformer primary. It delicately rolls off the lowest frequencies to maintain a safe load on the amplifier without affecting the higher (vocal) frequencies and the program continues without interruption. Low frequency current is limited through the transformer eliminating low frequency saturation. Automatic Saturation Compensation permits many speakers to be run on a distributed line with a 50Hz Hi-Pass filter before the amplifier, regardless of the number of speakers on the same line (the number of tapped watts cannot exceed the amplifier rating). With the same 50Hz Hi-Pass, 10 speakers on transformers will have the same full sound as a single speaker at 8 ohms. The ZX1i-100tw is black and features an 8", 2-way speaker with a 100° x 100° horn pattern and 70V transformer. Electro Voice ZX1i-100tw Features: Integrated QuickSAM Heavy-Duty Strong-Arm Mounting Bracket Included Indoor/Outdoor Design - Meets IEC 529, IP44 & MIL810 Environmental Specs ASC Automatic Saturation Compensation EV8L 8" Weatherized Cone High-Output LF Transducer DH2005 1" Exit True Compression Driver 100° x 100° Coverage Patterns Rotatable Horn Design 200W Continuous, 800W Peak Power Handling High Sensitivity, 123 dB Maximum SPL Get your Electro Voice ZX1i-100tw today!