Electro Voice ZX4

Electro Voice ZX4 Electro Voice ZX4 Description: The ZX4 features an integrated pole mount and, for varying stage depths, is capable of 45° or 55° angles via integrated monitor feet. ZX4 provides high output capability and high sensitivity in a remarkably lightweight package (only 44.5 lbs). ZX4 puts the new generation of EV products within the grasp of musicians everywhere. The ZX4 is the latest molded polypropylene loudspeaker from EV, who has led the world in the design of lightweight, high performance speakers for over two decades. The modern styling of the ZX4 is based on the newly released ZX5™. To deliver 400 Watts continuous power handling (1600W peak), ZX4 utilizes a DH3™ compression driver mated to a 90° x 50° Constant Directivity horn, in addition to the all-new EVS15SF™ woofer. Sensitivity is 100 dB and Electro Voice ZX4 Features: EVS15-SF 15" LF Transducer DH3 1.25" Voice Coil, 1" Exit Compression Driver 90° x 50° Coverage Pattern 400W Continuous (1600W) PowerHandling Selectable Monitor Angle (45° or 55°) High Sensitivity, 132 dB Maximum SPL Lightweight 20.2 kg (44.5 lbs) Integral Pole Mount Zx4 is capable as an entire system. With an integral pole mount the Zx4 is ready for main mix applications in DJ, band and general entertainment use. To accomodate different stage depths, Zx4 incorporates retractable monitor feet. This permits Zx4 to be used as a stage monitor with a 45° or 55° angle. Every detail of your music is reproduced from extended highs to strong lows. The DH3 compression driver with its pure titanium diaphragm, coupled with the Zx4's large 90° x 50° horn permits tremendous intelligibility and pattern control. The EVS15-SF 15" LF delivers tight, low bass and excellent power handling capacity. The rugged enclosure of the Electro-Voice® Zx4 is ideal for portable main mix and monitor applications, while the trend-setting design gives it appeal in even the trendiest of environments. At only 20.2 kg (44.5 lbs), the lightweight Zx4 permits ease of transport and set up. Electro Voice ZX4 Specifications: Frequency Response (-3dB): 60Hz - 20kHz Frequency Range: (-10dB): 42Hz - 20kHz Recommended Hipass Frequency: 42Hz Axial Sensitivity: 100dB (1W/1m) Maximum Calculated SPL: 132dB Horizontal Coverage: 90° Vertical Coverage: 50° Rated System Power: 400 Watts Continuous, 1600W Peak LF Transducer: EVS15-SF, 15 inch (381mm) Driver HD Transducer: DH3, 1 inch (25.4mm) Exit Compression Driver Crossover Frequency: 1.5kHz Nominal Impedance: 8 Ohms Minimum Impedance: 6.5 Ohms Connectors: Neutrik Speakon NL4 Enclosure Material: Polypropylene Structural Foam Suspension: Enclosure has locations for 3 single stud attachment plates and 8 forged steel eyebolts - 2 on top, 2 on side, and 4 on rear of enclosure. Grille: Polyester power coated, 16GA galvanized steel Dimensions: 27.26 x 17.57 x 16.16" (692 x 446 x 411mm) Net Weight: 44.5 pounds (2