Mackie 808S

Mackie 808S Mackie 808S Description: The same power amp structure as the 808M mono mixer, plus stereo I/O capability and several other important additional features. Twin 500W FR Series amps deliver 1,000W @ 4 ohms and are switchable as mains or main/monitors. 8 mic/line channels feature master phantom power, inserts on 1-6. 1/4" stereo inputs on channels 7 and 8, stereo pan control on all 8 channels, true stereo 9-band graphic EQ on mains, plus a 9-band for the monitors. It includes a 32-bit custom EMAC® digital effects processor with 16 different effects and 2 controllable parameters per effect, a special EFX WIDE effects-enhancement switch, and a way-cool Break switch that mutes channels 1-6 during breaks. It also features Mackie's renowned discrete mic pre-amps (the best found on any powered mixer), and an amp-routing switch that lets you assign power amps to mains only or mains and monitors. An external effects section has separate sends and returns, plus a footswitch jack to override internal and external effects. Mixer line-out jack lets you add extra power amps. 8 mic/line channels feature master phantom power, inserts on 1 through 6, and dual line inputs on channels 7 and 8. Each channel is provided with 3-band EQ and separate 9-band graphic EQs are provided for mains and monitors. Mackie 808S Features: 1200 real watts/2 ohms from twin 600-watt FR Series High-Current power amps Power amps switchable as stereo mains or main plus monitor 8 mic/line channels with master phantom power Stereo line inputs on channels 7 and 8 Inserts on channels 1-6 Active 3-band EQ and stereo pan control on each channel True stereo 9-band graphic EQ on mains 9-band graphic EQ on monitor Mackie 808S Specification: Frequency Response Mic Input to Main Mixer Output (Trim at 0 dB) +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 80kHz Mic Input to Power Amp Output at rated power output: +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 55kHz Distortion: THD and SMPTE IMD; 20 Hz to 20 kHz Mic Input to Main Mixer Output < 0.005% at +4 dBu output Mic Input to Power Amp Output < 0.15% 250 mW to rated power Common Mode Rejection Ratio: (CMRR) at 1kHz, Trim at 0 dB 60 dB Noise: 20Hz-20kHz bandwidth, 150-ohm source impedence Equivalent Input Noise (EIN): -127 dBu Residual Output Noise with Main Mixer, Monitor, & Effects outputs, Channel & Master levels off: -95 dBu Main Mixer Output Noise with Master at nominal (-10dB), all channels off: -92 dBu with Master and one input at nominal (-10dB and -20dB), Trim at 0dB: -85 dBu Crosstalk, at 1 kiloHertz: Adjacent Inputs or Input to Output: -90 dB Fader Off: -90 dB Break Switch Mute: -80 dB Input Level Trim Control Range: 0 to -40dB Phantom Power: +15V DC Equalization: Rumble Reduction 75hz, -18dB/octave Channel EQ High ±15dB at 12kHz Mid ±12dB at 2.5kHz Low ±15dB at 80Hz Graphic EQ: 9 bands, ±15dB, Q=1.414 ISO octave centers at 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16K